< Back || Next >

Secondary Framing

Roof Structurals

Nucor Building Systems supplies either cold-formed Zee section purlins or open web bar joists. The decision on which structural members to use will be based on the economy of each member, the roof system used, the product application, or by customer choice at the time of order entry.

Nucor's continuous purlin system meets the stringent requirements of the latest edition of the AISI specification.

All open web joists are designed in accordance with the Steel Joist Institute requirements.

Cold-Formed Structural Members Section Properties

Section Depth (in.) Flange Width (in.) Thickness (in.) Sx* (in.3) Ix* (in.4) Va* (kips) Ma* (in.-kips)
8z060 8.0 2.50 0.060 1.91 8.44 2.40 62.8
8z076 8.0 2.50 0.076 2.56 10.66 4.90 84.72
8z105 8.0 2.50 0.105 3.67 14.67 12.33 120.80
10z076 10.0 2.50 0.076 3.50 18.12 3.87 115.42
10z105 10.0 2.50 0.105 5.00 24.99 10.27 164.60
8c060 8.0 2.75 0.060 1.75 8.39 2.40 57.72
8c076 8.0 2.75 0.076 2.30 10.58 4.90 75.77
8c105 8.0 2.75 0.105 3.55 14.47 12.33 117.11
10c076 10.0 2.75 0.076 3.12 17.94 3.87 103.08
10c105 10.0 2.75 0.105 4.83 24.61 10.27 159.38

*Incorporation of section properties to a particular design must be done by a competent engineering professional who is cognizant of all criteria set forth by the latest edition of AISI.

Secondary Framing

< Back || Next >




Back to Steel Builders, Inc.

KROPP Companies

Steel Builders, Inc.
1020 Kennedy Ave.
Schererville, IN 46375

219-865-1111 Phone
219-865-4547 Fax

www.kroppcompanies.com
aekropp@netnitco.net